aFe Power BladeRunner 3in Aluminum Cold Charge Pipe, Black [46-20109]
Fits 2003-2007 6.0L Power Stroke V8
![aFe Power BladeRunner 3in Aluminum Cold Charge Pipe, Black [46-20109] for 2003-2007 Ford F-250/F-350 Super Duty (6.0L Power Stroke V8)](https://afepower.com/media/catalog/product/4/6/46-20109_1.jpg)
We earn a commission if you buy through links on this page. Prices are the same for you. Full disclosure
Price tracked 13 times since Jul 25, 2026 at the stores we check daily, not eBay: low $247.90, high $281.40, currently $281.40.
Requires: aFe lists Ford Diesel Trucks 03-07 V8-6.0L turbodiesel. Cold side only; hot-side pipe 46-20108-B and both-sides kit 46-20104-B are separate parts.
where to buy · 2 retailers tracked
The cold-side charge pipe carries cooled air from the intercooler to the intake. This is a 3-inch mandrel-bent aluminum replacement for the factory tube, supplied with 5-ply silicone couplers and stainless T-bolt clamps.
why this one — This is the 6.0L answer to the same problem the 6.7L has: factory charge tubing and boots start blowing off once you add fuel or boost. Two things to know before buying. It is the cold side only, so if you want both sides done you need aFe 46-20104-B instead and should budget accordingly. On the plus side it already has a 1/8-inch NPT port in it, so a boost gauge sender or a water-methanol nozzle can go straight in later without drilling.
AFe describes decreased turbulence and minimized pressure loss increasing horsepower and torque but publishes no specific figure for this part. source ↗
No published gain figure for this part, and nothing here is a guarantee. Price is a list price and can lag the retailer; confirm at checkout. See how we check a price and our affiliate disclosure.