RideBuildList logoRIDEBUILDLIST

ICON Vehicle Dynamics 0-2.25in Lift, Stage 1, 2.5 EXP Suspension System [K53191]

Fits 2022-2025 3.4L i-FORCE Twin-Turbo V6 (V35A-FTS, base output) · 3.4L i-FORCE Twin-Turbo V6 (V35A-FTS, base output, revised) · 3.4L i-FORCE Twin-Turbo V6 (V35A-FTS, high output) · 3.4L i-FORCE MAX Twin-Turbo V6 Hybrid (V35A-FTS + bell-housing motor)

ICON Vehicle Dynamics 0-2.25in Lift, Stage 1, 2.5 EXP Suspension System [K53191] for 2022-2025 Toyota Tundra (3.4L i-FORCE Twin-Turbo V6 (V35A-FTS, base output), 3.4L i-FORCE Twin-Turbo V6 (V35A-FTS, base output, revised), 3.4L i-FORCE Twin-Turbo V6 (V35A-FTS, high output), 3.4L i-FORCE MAX Twin-Turbo V6 Hybrid (V35A-FTS + bell-housing motor))

We earn a commission if you buy through links on this page. Prices are the same for you. Full disclosure

gain
no power claim (fitment part)
price
$1,418.06
at eBay
install
4/5 difficulty · ICON does not publish an install time for this kit. Rated a professional-level job: the front coilovers replace the factory struts, and an alignment is required afterward.
shipping weight
31 lbs
listed by ICON Vehicle Dynamics, box included · replaces a factory part, adds only the difference
fitment

Requires: ICON does not recommend lifting above 2.25in without upper control arms on 4WD models. Rear shocks support 0-1.5in rear lift on coil-spring trucks.

Buy at eBayAdd to build

where to buy · 3 retailers tracked

  • eBaybest pricechecked Sep 30$1,418.06view
  • Suspension Superstorechecked Sep 16$1,479.75view
  • ICON Vehicle Dynamicschecked Aug 10$1,564.89view

This replaces the factory front struts with ICON 2.5 inch coilovers that you can set anywhere from stock height up to 2.25 inches of lift, and swaps the rear shocks for ICON 2.0 units. It also includes sway bar drop brackets so the front sway bar sits correctly at the new height.

why this one — Unlike a spacer leveling kit, this actually changes how the truck rides - the EXP coilover has an internal reservoir for extra oil capacity, which is what keeps damping consistent on washboard roads instead of fading. It is the cheapest way into a real ICON system for this truck. Downsides worth knowing: ICON says it does not fit TRD Pro, load-leveling rear air suspension, or Adaptive Variable Suspension trucks, and ICON itself does not recommend going past 2.25 inches on a 4WD without adding upper control arms, which are not in this kit.

why no number is shown

Suspension system. No horsepower or torque claim applies and ICON publishes none.

Questions about this category

F-150: what do suspension parts cost?F-150: how hard is it to install suspension parts, and how long does it take?
this part appears in
Toyota Tundra Suspension Guide: Leveling Kits, Lift Kits, and Coilovers by Generation
Price-drop alert for this part

One email if this part drops in price at a tracked retailer. Real numbers, no spam, stop anytime.

No published gain figure for this part, and nothing here is a guarantee. Price is a list price and can lag the retailer; confirm at checkout. See how we check a price and our affiliate disclosure.

Independent site. Not affiliated with, endorsed by, or sponsored by any vehicle manufacturer, parts manufacturer, or retailer named on this site. Vehicle and brand names are used only to describe compatibility. Gains shown are manufacturer claims, community estimates, or independent tests, labeled by source on every part, and are not guarantees.