ReadyLift 3.5in SST Lift Kit (Coil Spring Trucks)
Fits 2019-2026 3.6L Pentastar V6 eTorque (DT) · 5.7L HEMI V8 (DT) · 5.7L HEMI V8 eTorque (DT) · 3.0L EcoDiesel V6 (DT, third-gen) · 3.0L Hurricane Twin-Turbo I6 (Standard Output) · 3.0L Hurricane Twin-Turbo I6 (High Output)
We earn a commission if you buy through links on this page. Prices are the same for you. Full disclosure
A 3.5 inch front and 2 inch rear lift for coil-sprung DT Ram 1500s. It works by stacking billet top hats and preload spacers on the front struts and coil spacers at the rear, and it comes with tubular upper control arms and rear bump stop pads so the suspension still travels properly.
why this one — This is the middle ground between a cheap spacer and a full replacement-shock kit: you get real lift and the corrected control arms, but you keep your factory struts and shocks, so ride quality stays roughly stock rather than improving. Choose it if 35s are the goal and you do not want to spend lift-kit money on new dampers. Note it is the exact opposite of the ReadyLift 66-19150 above, that one is air-suspension only and this one specifically is not.
- Requires: Coil spring trucks only. ReadyLift states it is not for use on air-suspension equipped trucks, will not fit TRX, and is not for factory pre-lifted or off-road-package trucks or any truck already over 22in hub-to-fender. New body (DT) only. Max tire 35x12.50 on a 20x9 zero offset wheel per ReadyLift.
Gain shown is a no published number, not a guarantee. Price is a list price and can lag the retailer; confirm at checkout. See our affiliate disclosure.